Hey there. Great video. Thanks for taking the time. Just a small clarification, for viewers, if I may. At around 1:16:00, it was mentioned that L2VPN requires VRF, RD and RT on PE routers. To clarify: If you are simply creating point-to-point EoMPLS VCs, there is no requirement for BGP; IGP and LDP is all that is needed in the control plane. If you are using VPLS (layer 2 multi-point-to-multi-point), an RD is only required if you intend to use BGP for VC signalling and end-point auto discovery. Otherwise, if your intention is just to do static VPLS, no RD is necessary because no BGP is necessary.
Excellent video, very good instructor. Learned a lot. Thank you.
Hi Rob, Video was very helpful. can u plz explain 1) how to config load sharing on mpls cloud? 2) what is AS overide?
at 9:35 u say custB is 12.1.1.1/30 and custB(left) is 12.1.1.2/30. But dont u think PE4 has to have 12.1.1.2 ? because that subnet has 2 ip addresses and .2 must be on other side of link (PE4) ?
Other than that, great video 😀
At around the 1:05:30 point Rob you talk about setting up the CE-PE IGP using OSPF. You explain the process of creating a new OSPF process tied to the customer VRF. It was not quite accurate because OSPF does not support address-family configuration. Instead the command should be router ospf X vrf Y Where X is the OSPF process number (2). And Y is the VRF name (vrf Cust_A) in other words to initialize the OSPF process the command should be router ospf 2 vrf Cust_A
How can this be accomplished when you have to traverse the Internet?
Holy cow man. I was going to subscribe and hopefully get you some money somehow but with annoying adds every 10 minutes, I lose focus.
This is decent stuff for l3vpn and mpls understanding..good job Rob
good stuff
Good video mate. Get 75% off a 3 year plan of NordVPN. The deal comes down to only $2.99 per month!
Go to https://go.nordvpn.net/aff_c?offer_id=288&aff_id=19161&url_id=1034
Amazing video! thank you! Subscribed!
Hey Rob, do you have any videos on IP SLA?
Hey there. Great video. Thanks for taking the time. Just a small clarification, for viewers, if I may. At around 1:16:00, it was mentioned that L2VPN requires VRF, RD and RT on PE routers. To clarify: If you are simply creating point-to-point EoMPLS VCs, there is no requirement for BGP; IGP and LDP is all that is needed in the control plane. If you are using VPLS (layer 2 multi-point-to-multi-point), an RD is only required if you intend to use BGP for VC signalling and end-point auto discovery. Otherwise, if your intention is just to do static VPLS, no RD is necessary because no BGP is necessary.
Excellent video, very good instructor. Learned a lot. Thank you.
Hi Rob, Video was very helpful. can u plz explain
1) how to config load sharing on mpls cloud?
2) what is AS overide?
at 9:35 u say custB is 12.1.1.1/30 and custB(left) is 12.1.1.2/30. But dont u think PE4 has to have 12.1.1.2 ? because that subnet has 2 ip addresses and .2 must be on other side of link (PE4) ?
Other than that, great video 😀
At around the 1:05:30 point Rob you talk about setting up the CE-PE IGP using OSPF. You explain the process of creating a new OSPF process tied to the customer VRF. It was not quite accurate because OSPF does not support address-family configuration. Instead the command should be router ospf X vrf Y Where X is the OSPF process number (2). And Y is the VRF name (vrf Cust_A) in other words to initialize the OSPF process the command should be router ospf 2 vrf Cust_A