Nintendo Switch清晰版！ -DIY透明開關

43 comments

1. Just finished changing the shell of my switch! This video is definitely very helpful and I totally recommend if you want to change your switch』s outer shell

2. Would anyone be able to help? I did a mod and now my right joy con isn't being recognized? Like it makes the noise and the color pops up on side but the icon on the bottom left just shows my right joy con as no present.

3. 6:36 You bent the bottom of the battery heating that glue up would be a good idea if anyone does this just don't heat it up too much because it is a battery.

4. my guess is that the square thing is for the nfc crap

5. used your video step by step did everything on carpet with atomic purple and everything works. Thanks like and sub.

6. Huh hu hu huh hu…. you said vibrator lol

7. Is this transparent white or grey??

8. Jerry can you give me a nitendo svich im poor i mean i have a house but my dad bearly makes 10 dolars a day and my grany is so sick can you pls give a nitendo svich and my granpa give me this samsung s 3 and he past away pls can you

9. Any tips on taking out screws if you』ve striped them? All the striped screw removers I』ve found are to big. ?

10. I have a problem that i need help with ..my right joycon wont charge and it somtimes connects to my switch .would anyone have an idea what the problem is ?

11. So I put this housing on and it wasn』t to difficult, but on the left joycon the minus and the photo button I can barely press because it』s not sticking out far enough. Any suggestions on how to fix that?

12. Just used this video to swap out my joy-con shells. Thank you for the video! Super easy to follow along with.

13. RIP when drifting happens on those joycons.

14. Im watching this beginning to end every day until my housing comes to make sure I know what I』m in for ? IM BEING VERY AMBITIOUS

15. I want to do this so bad 🙁
    But i'm afraid that iam going to break my switch 🙁

16. instructions unclear i cut a wire on accident it blew up and im now homeless

17. I changed a joycon myself but somehow it's not lighting up anymore and separate it, the sensor's not working. Please, how can I fix it?

18. Wow the pack panel is so easy to do

19. would have been nice to mention the buttons on the rail. You have grey joycons so it doesn't matter but I changed my blue&red into translucent green and it would have been very weird with red&blue side buttons…others that are heavily relying on the video for instructions can easily overlook that. thankfully I am a tinkerer and only needed the video as a screw/order guide.

    that said, i need to reopen my left joycon anyway… i think my minus button isn't seated correct as it feels more mushy than my plus button. and I dropped and thought I lost an original screw and used an included spare screw but then I found the original and want to go back and swap it or ill never stop thinking about the 1 chinese screw mixed with the nintendo screws…

    for those who asked……

20. Got the same clear shell and turned out great! This is the first handheld or console I have ever opened and boy was I nervous but this guide was great. Took me a couple of hours. Would recommend.

21. thank you so much for the video! i now have clear red joycons! you going in depth really made it easy! thank you!

22. Man it looks so scary and difficult to do

23. Thanks Jerry but i clicked on the wrong video i have a lite buttt i subbed anyways cuz why not ok bye.

24. I tried this on my brothers switch and I'm on the part where you rip all the cables out and my brother comes home in 10 minutes..

25. This video was perfect and it helped me get my joycons replaced within a bit over an hour on my first try. A few recommendations for people:
    -take your time! Better to have a joycon that works even if it takes hours than to rush through it and break all the delicate wires
    -I recommend you buy a separate set of tools even if the shells you buy come with them. Usually the ones that come with the shells are cheap and I promise you'll strip the screws. Also sets come with tweezers and prying tools that will make all this so much easier
    -remember that the ribbon cables have locks on all of them!! Don't try to yank or shove any wires without checking the switches first. And when putting the wires back make sure to relock everything so it's secure
    -like was said in the video, keep track of all your screws because God are they tiny and easy to lose. Hopefully the shells you purchase will have spares like mine did, but it's best to use the originals if you can
    -I know I already said to take your time but I'm serious. ESPECIALLY on the right joycon. The ribbon wires are at awkward positions and it's easy to pull to hard and rip one. Learned this the hard way when trying to put back the zr ribbon wire. Ripped it and now I gotta get a new one. My fault, of course. Every other button works perfectly fine
    -don't try to pull anything out if it's not budging. You will break something and regret it.
    -follow the video exactly and you should be just fine
    Other than that feel free to ask me anything. It's my first time doing anything like this but maybe I can answer some simple questions

26. "I have a fully functional Nintendo Switch !"

    Me: doubt

27. For me, the little black box connecting the battery got disconnected from the wires. It was harder to get off than on the left joycon. Watch out when doing this!

28. So I do the joycons fine. But for some reason…CANNOT get the screws off the side of the console. Have tried like 3 different phillips screwdrivers. All of them are like glued in. It is crazy.

29. By far the hardest part for me was getting that right trigger ribbon cable in. Akward, fiddly little bastard.

30. I only did the switch back ?

31. you should make a clear switch lite

32. i think that the spacers for the joysticks are things to help keep dust and debris out.

33. The little black panel you pulled out of the right joycon is the NFC pad for Amiibo

34. Tell me when it comes in glacier

35. Hello I was wondering if you could do the joycons for my son he thinks it』s pretty hard And he doesn』t want to wreck his switch joy cons reply if your up for it

36. * How to destroy your Nintendo Switch*

37. Is the transparent joycon plastic the same material as the stock joycon plastic?

38. Don』t do it!!!
    I wanted this mod to have a d-pad setup on my left joycon. Even though I have lots of experience fixing a lot of phones, I found this project very difficult due to the flimsy ribbon cables never wanting to go into place. I even broke a screw because of how cheap the material was.
    Do yourself a favor and just buy a pre-made one, else you risk breaking it if you don』t have the right tools and experience.

39. When the lego kid becomes lego man

40. My name is Mohamed Ali 12:34

41. "Its pretty simple" he said

42. all devices should come with a clear option, looks so great.. they used to always do this with electronics when i was a kid.. looks so cool

43. Modificado edition !

Comments are closed.